Denon AVR 4806 Owners Manual - Page 107
ENTER, Front Bi-Amp connections
UPC - 081757506465
View all Denon AVR 4806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
S. Back: If no surround back speakers are used in the main room, their amplifier channels can be assigned for other uses, or one of the two channels can drive one surround back speaker in the main room, while the other channel can drive a monaural speaker in another zone. • Front: This provides a bi-amp mode for the two main front speakers, replicating the front left and front right amplifier channels' outputs. • Front B: Both surround back power amplifier channels can be used to provide a second set of stereo outputs that match the front left and right speakers, providing a Speaker B option for stereo sound in another location ( page 101). • ZONE2: This mode assigns the Surround Back amplifier channels to provide ZONE2 speaker-level outputs from the Surround Back speaker terminals, with the option of monaural or stereo operation depending on the "Channel Setup" setting. • ZONE3: This mode assigns the Surround Back amplifier channels to provide ZONE3 speaker-level outputs from the Surround Back speaker terminals, with the option of monaural or stereo operation depending on the "Channel Setup" setting. • SB/Z2: When only one surround back speaker is used in the main room (connected to the SBL speaker terminals), the surround back right amplifier channel can be used to provide monaural output to a speaker located in ZONE2. • SB/Z3: When only one surround back speaker is used in the main room (connected to the SBL speaker terminals), the surround back right amplifier channel can be used to provide monaural output to a speaker located in ZONE3. • Z2/Z3: When no surround back speakers are used in the main room, this mode provides monaural sound to a speaker in ZONE2 connected to the SBL speaker terminals, with monaural sound to a speaker in ZONE3 connected to the SBR speaker terminals. • SB/- - -: Only the Surround Back Left speaker terminals are active. • - - -: Both Surround Back speaker terminals are inactive. Advanced Setup - Part 1 3 Press the ENTER button to enter the setting. • The "Option Setup" menu reappears. • The "SB/Z2", "SB/Z3" and "SB/- - -" modes can only be selected when the surround back speaker configuration is set to "1spkr". • The "Z2/Z3" mode can only be selected if the playback channels are configured as monaural ("Mono") in the "Channel Setup" menu. Front Bi-Amp connections Certain loudspeakers are equipped with two sets of input terminals, for bi-amplification. The AVR-4806 Amp Assign mode allows you to power bi-amp-capable speakers with two amplifier channels. Be sure to consult the owner's manual of your bi-amp-capable speakers for further information before proceeding. AVR-4806 SPEAKER NOTE: • When making bi-amp connections, be sure to remove the short-circuiting bar included with the speaker. 107