Denon AVR 4806 Owners Manual - Page 110
ZONE2 and ZONE3 tone control and, channel level setting, Zone2/3 Tone/Ch Lev. at the Option Setup
UPC - 081757506465
View all Denon AVR 4806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Advanced Setup - Part 1 ZONE2 and ZONE3 tone control and channel level setting • Adjust the sound output from ZONE2 and ZONE3. 1 Press the CURSOR D or H button to select the "Zone2/3 Tone/Ch Lev." at the "Option Setup" menu, then press the ENTER button. • Display the "Zone2/3 Tone/Ch Lev." screen. 2 Press the CURSOR D or H button to select the zone whose sound you want to adjust (ZONE2, ZONE3), then press the ENTER button. • Switch to the setting screen. Example: When "Zone2" is selected 3 Press the CURSOR D or H button to select the item to be set, then press the CURSOR F or G button to adjust the parameter. Bass: Adjust the tone for the bass. Treble: Adjust the tone for the treble. (The bass or treble sound can be adjusted between -12 dB and +12 dB in steps of 2.0 dB.) HPF: Set this to "ON" if your speakers do not have a very strong capacity for producing low bass. Using the high pass filter makes it possible to reduce distortion of the bass sound. Channel Level: Set so that the playback level is the same for the left and right channels. (The volume can adjusted between -12 dB and +12 dB in steps of 1.0 dB.) 4 Press the ENTER button. • Return to the "Zone2/3 Tone/Ch Lev." screen. Use the same procedure to make the settings for ZONE3. 5 Press the CURSOR D or H button to select the "Exit", then press the ENTER button. • The "Option Setup" menu reappears. • The "Channel Level" setting is only possible when ZONE2 or ZONE3 is set to "Stereo" in the "Channel Setup" menu. 110