Denon AVR 4806 Owners Manual - Page 84

Advanced Operation Other function ZONE3/REC SELECT FUNCTION DIRECT/STEREO SOURCE FUNCTION SURROUND SURROUND MODE STEREO DIRECT SURROUND PHONES INPUT MODE MODE Playing Super Audio CDs with an IEEE1394 cable 1 Select the input source to which IEEE1394 was assigned at the "IEEE1394 Assign" ( page 92) in the system setup. Example: CD ON SCREEN When playing DSD signals in the DIRECT or PURE DIRECT mode, the DSD signals are converted into analog signals. When playing in other surround modes, the DSD signals are first converted into PCM signals with a sampling frequency of 88.2 kHz. However, when playing DSD 2-channel signals in the STEREO mode, they are converted into PCM signals with a sampling frequency of 176.4 kHz. The input signal and playing status can be checked by pressing the ON SCREEN button on the remote control unit. Example: When DSD multi-channel signals are played in the DIRECT mode (Main unit) (Remote control unit) (Remote control unit) • The IEEE1394 indicator lights. Lights 2 Select the surround mode. Example: DIRECT Example: When DSD multi-channel signals are played in the ROCK ARENA mode (Main unit) (Remote control unit) (Remote control unit) 3 Start playback on the selected component. • The DSD indicator lights. Lights For operating instructions, refer to the component's manual. "DSD DIRECT" is shown on the display when playing DSD 2-channel signals in the DIRECT mode. "DSD MULTI DIRECT" is displayed when playing DSD multichannel signals in the DIRECT mode (SB CH OUT "OFF"). 84