Denon AVR 4806 Owners Manual - Page 108
Setting the Volume Control, Volume Control at the Option Setup
UPC - 081757506465
View all Denon AVR 4806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Advanced Setup - Part 1 Setting the Volume Control • Set the upper limit for the volume, the volume level when the power is turned on, and the volume level when the mute mode is set for the different zones. 1 Press the CURSOR D or H button to select the "Volume Control" at the "Option Setup" menu, then press the ENTER button. • Display the "Volume Control" screen. 2 Press the CURSOR D or H button to select the desired setting, then press the CURSOR F or G button to select the parameter. Volume Limit: Set the upper limit for the volume for the different zones. • -20 dB, -10 dB, 0 dB: The volume cannot be increased above the selected levels. • OFF: If you do not want to set a volume limit, select "OFF". In this case, the volume can be set to the AVR4806's maximum volume (output) level of +18 dB, which is extremely loud. Power On Level: Set the volume that is set when the power is turned on for the different zones. You can adjust the volume level within the range of -80 to +18 dB in steps of 1.0 dB. • - - - (Mute) The volume is always muted when the power is turned on. • LAST The volume set when the AVR-4806 was last used is stored in the memory and set when the power is turned on. Mute Level: Set the volume attenuation level when the mute mode is set for the different zones. • FULL The volume is fully muted. • -40 dB The volume is lowered 40 dB from the current level. • -20 dB The volume is lowered 20 dB from the current level. Volume Level: Set whether to fix the output level for the different zones or make it variable. • Variable The level can be adjusted freely using buttons on the remote control unit. • -40 dB, 0 dB The output level is fixed at the set level and the volume can no longer be adjusted. 3 Press the ENTER button to enter the setting. • The "Option Setup" menu reappears. • For ZONE2 and ZONE3, the "Volume Limit" and "Power On Level" can be set when "Variable" is selected for "Volume Level". • When the power amplifier is assigned to either of the ZONE2 and ZONE3 channels at "Power Amp Assign", "-VAR-" (only variable) is displayed and the fixed level cannot be set. 108