Epson PowerLite Pro G6150 User Manual - Page 145

Event ID code 0432 0435 0434 0481 0482 0485 0433 0484 04FE 04FF 0891 0892 0893 0894 0898 0899 089A 089B Cause and solution The EasyMP Network Projection program did not start. Turn the projector off and then on again. Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. Cannot display the transferred images. Restart the EasyMP Network Projection program. Communication with computer was disconnected. Restart the EasyMP Network Projection program. The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again. A projector system error has occurred. Turn the projector off and then on again. Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. Communication with unauthorized access point was disconnected. Contact your network administrator. Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCP setting in the Network menus. Communication error. Restart the EasyMP Network Projection program. The projector's EAP authentication type does not match the network. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. EAP server authentication failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. 145