Epson PowerLite Pro G6150 User Manual - Page 166

Power light On On Red On Red Red or flashing red Red Lamp light Off Temperature light Off Off Off Off Off Flashing Off orange Off Flashing red Flashing Flashing red red Off Off Filter light Status and solution Flashing orange Orange Red Off Off Off Flashing red Low air flow through the projector. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. No air filter. Check to see if the air filter is securely installed. Low air flow through the air filter. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. The lamp is past its replacement period and needs to be replaced to avoid damage. Do not continue using the projector. A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help. Internal projector error or air exhaust vent error. Turn the projector off, unplug it, and contact Epson for help. The air flow sensor has a problem. Turn the projector off, unplug it, and contact Epson for help. Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. 166