Epson PowerLite Pro G6150 User Manual - Page 45
Installing Batteries in the Remote Control, Parent topic, Related tasks, Caution
View all Epson PowerLite Pro G6150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2. Insert the end of the cable clip anchor into the cable clip hole near the HDMI port as shown. 1 Cable clip hole 2 Cable clip anchor 3 Cable clip 3. Place the open cable clip around the HDMI cable, but don't lock it into place. 4. Slide the cable clip onto the anchor and lock the clip onto the HDMI connector as shown. To remove the cable clip, open the clip and disconnect the HDMI cable. Then pinch the sides of the cable clip anchor and carefully pull it out of the cable clip hole. Parent topic: Setting Up the Projector Related tasks Connecting to a Computer for HDMI Video and Audio Connecting to an HDMI Video Source Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 45