HP 2600 HP Business Inkjet 2600/2600dn - (English) User's Guide - Page 14
Setting up the printer, Step 1: Check the box contents, Step 2: Install the printer trays - setup
View all HP 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Setting up the printer Note To set up the printer, complete the following steps. For illustrated setup information, see the setup poster. Step 1: Check the box contents Unpack the printer and remove the packing tape and shipping foam. Step 2: Install the printer trays Install tray 2 1 Position the tray 2 base in the location where you want to place the printer. The printer is designed to rest directly on top of the base. 2 Lift the printer and align it with the tray 2 base. 3 Set the printer on top of the tray 2 base. 4 Place the tray 2 cover on the end of the tray. 5 Align tray 2 with the opening in the tray 2 base, and then slide the tray into the base until it snaps into place. Install the output tray 1 Align the output tray with the slot above the tray 1 opening. 2 Slide the output tray firmly into the printer until it snaps into place. Install tray 1 Slide tray 1 into the printer below the output tray until it snaps into place. 2-4 ENWW