HP 2600 HP Business Inkjet 2600/2600dn - (English) User's Guide - Page 76
Printing on transparencies , To print on envelopes and cards using the rear manual
View all HP 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Note 7-16 To print on envelopes and cards using the rear manual feed If you want to print using the rear manual feed and an optional autoduplex unit is installed in the printer, remove the duplex unit and reinstall the rear manual feed. For more information about configuring settings in the printer driver, see "Using the printer driver." 1 In the printer driver, select Manual Feed as the media source, and then select the envelope or card size. 2 Print the document. 3 When the indicator light on the LCD control panel blinks, insert one envelope (with the flap facing down) along the left edge of the rear manual feed. For more information, see "Loading the manual feed units." 4 Press RESUME on the LCD control panel. After each page prints, the printer prompts you to load another envelope. Load envelopes, as needed, until the printer finishes printing. To print on envelopes and cards using tray 1 1 Load the envelopes or cards in tray 1. (If you are loading envelopes, make sure the flap is facing up.) For more information about loading media, see "Load paper and configure media types and sizes." 2 In the printer driver, select Tray 1 as the media source, and then select the envelope or card size. 3 Print the document. Printing on transparencies When printing on transparencies, use the following guidelines: ! Use tray 1 to print on transparencies. The printer automatically detects that transparencies are loaded and optimizes the printing process to allow the transparencies to dry completely. (You can load up to 80 transparencies in tray 1.) ! By default, the printer automatically detects transparencies loaded in tray 1. For information about turning on and turning off this setting, see "Changing the transparency sensor setting." ENWW