HP 2600 HP Business Inkjet 2600/2600dn - (English) User's Guide - Page 35
Step 2: Verify that the printer works, Step 3: Install the printer software, INFORMATION
View all HP 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Note Note Step 2: Verify that the printer works 1 Connect the power cord and turn on the printer. 2 Press MENU on the LCD control panel repeatedly until INFORMATION appears. 3 Press ITEM repeatedly until PRINT CONFIGURATION PAGE appears. 4 Press SELECT to print the configuration page. Because you have installed an HP Jetdirect print server, two configuration pages print. The HP Jetdirect Configuration Page contains setup information (for example, LAN HW ADDRESS) that might be needed for the next step. Step 3: Install the printer software Install the PCL 5C or Postscript printer driver from the Starter CD. For more information, see "Install the printer software and connect the interface cable." For more information about setting up and using the HP Jetdirect print server, see its guide on the Starter CD. ENWW 4-3