HP 2600 HP Business Inkjet 2600/2600dn - (English) User's Guide - Page 70
To load the front manual feed, Manual Feed
View all HP 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
To load the front manual feed 1 Slide the paper width guide on the output tray to its outermost position. 2 Insert the media along the right side of the front manual feed, printside down. Push the media in until it reaches the maximum depth. 3 Slide the paper width guide to fit snugly against the media. 4 In the printer driver, select Manual Feed as the media source, and then select the type of media. 5 When prompted, press RESUME on the LCD control panel. To load the rear manual feed 1 If an auto-duplex unit is installed in the printer, remove it and reinstall the rear manual feed: a While pushing the auto-duplex unit release buttons, slide the auto-duplex unit out of the printer. b Slide the rear manual feed into the back of the printer. 2 Insert a single sheet of media vertically (portrait orientation) along the left side of the rear manual feed. The media should be print-side up. 3 Push the media into the printer. When the printer sensors detect the media, the printer will pull the media slightly farther into the printer. 4 In the printer driver, select Manual Feed as the media source, and then select the type of media. 5 When prompted, press RESUME on the LCD control panel. 7-10 ENWW