HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 106
udp-helper server
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
View System view Default level 2: System level Parameters port-number: Specifies the UDP port number with which packets need to be forwarded, in the range of 1 to 65535 (except 67 and 68). dns: Forwards DNS data packets. The corresponding UDP port number is 53. netbios-ds: Forwards NetBIOS data packets. The corresponding UDP port number is 138. netbios-ns: Forwards NetBIOS name service data packets. The corresponding UDP port number is 137. tacacs: Forwards terminal access controller access control system (TACACS) data packet. The corresponding UDP port number is 49. tftp: Forwards TFTP data packets. The corresponding UDP port number is 69. time: Forwards time service data packets. The corresponding UDP port number is 37. Description Use udp-helper port to enable the forwarding of packets with the specified UDP port number. Use undo udp-helper port to remove the configured UDP port numbers. By default, no UDP port number is specified. You can configure up to 256 UDP ports on a device. All of the specified UDP port numbers will be removed if UDP helper is disabled. Examples # Forward broadcast packets with the UDP destination port number 100. system-view [Sysname] udp-helper port 100 udp-helper server Syntax udp-helper server [ vpn-instance vpn-instance-name ] ip-address View undo udp-helper server [ [ vpn-instance vpn-instance-name ] ip-address ] Interface view Default level 2: System level Parameters vpn-instance vpn-instance-name: Specifies the name of a MPLS L3VPN, a case-sensitive string of 1 to 31 characters. Without this option specified, the command indicates that the destination server is in the public network. ip-address: Specifies the IP address of the destination server, in dotted decimal notation. 99