HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 134
ipv6 icmpv6 multicast-echo-reply enable, ipv6 nd autoconfig managed-address-flag
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Parameters bucket bucket-size: Number of tokens in the token bucket, in the range of 1 to 200. ratelimit interval: Update period of the token bucket in milliseconds, in the range of 0 to 2,147,483,647. The update period "0" indicates that the number of ICMPv6 error packets sent is not restricted. Description Use ipv6 icmp-error to configure the size and update period of the token bucket. Use undo ipv6 icmp-error to restore the defaults. By default, the size is 10 and the update period is 100 milliseconds. A maximum of 10 ICMPv6 error packets can be sent within 100 milliseconds. Examples # Set the capacity of the token bucket to 50 and the update period to 100 milliseconds. system-view [Sysname] ipv6 icmp-error bucket 50 ratelimit 100 ipv6 icmpv6 multicast-echo-reply enable Syntax ipv6 icmpv6 multicast-echo-reply enable View undo ipv6 icmpv6 multicast-echo-reply System view Default level 2: System level Parameters None Description Use ipv6 icmpv6 multicast-echo-reply enable to enable replying to multicast echo requests. Use undo ipv6 icmpv6 multicast-echo-reply to disable replying to multicast echo requests. By default, the device is disabled from replying to multicast echo requests. Examples # Enable replying to multicast echo requests. system-view [Sysname] ipv6 icmpv6 multicast-echo-reply enable ipv6 nd autoconfig managed-address-flag Syntax ipv6 nd autoconfig managed-address-flag undo ipv6 nd autoconfig managed-address-flag 127