HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 175
tunnel-protocol, ipv4-ipv4, ipv6-ipv4 6to4, ipv6-ipv4 isatap
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
View undo tunnel-protocol Tunnel interface view Default level 2: System level Parameters ipv4-ipv4: Specifies the IPv4 over IPv4 tunnel mode. ipv4-ipv6: Specifies the IPv4 over IPv6 tunnel mode. ipv6-ipv4: Specifies the IPv6 over IPv4 manual tunnel mode. ipv6-ipv4 6to4: Specifies the IPv6 over IPv4 6to4 tunnel mode. ipv6-ipv4 isatap: Specifies the IPv6 over IPv4 ISATAP tunnel mode. ipv6-ipv6: Specifies the IPv6 over IPv6 tunnel mode. Description Use tunnel-protocol to specify the tunnel mode for the tunnel interface. Use undo tunnel-protocol to restore the default. The default tunnel is an IPv4 over IPv4 tunnel. You can select a tunnel mode according to the actual network topology and application. The two ends of a tunnel must have the same tunnel mode specified. Otherwise, traffic transmission may fail. Only one automatic tunnel can be created at the start point of a tunnel. Examples # Specify the 6to4 tunnel mode for interface Tunnel 2. system-view [Sysname] interface tunnel 2 [Sysname-Tunnel2] tunnel-protocol ipv6-ipv4 6to4 168