HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 129
ipv6 address, ipv6 address anycast, Enable IPv6.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
By default, IPv6 is disabled. Examples # Enable IPv6. system-view [Sysname] ipv6 ipv6 address Syntax ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length } View undo ipv6 address [ ipv6-address prefix-length | ipv6-address/prefix-length ] Interface view Default level 2: System level Parameters ipv6-address: Specifies the IPv6 address. prefix-length: Specifies the prefix length of the IPv6 address, in the range of 1 to 128. Description Use ipv6 address to configure an IPv6 global unicast address for an interface. Use undo ipv6 address to remove the IPv6 address from the interface. By default, no global unicast address is configured for an interface. Except for the link-local address automatically obtained and the link-local address generated through stateless autoconfiguration, all IPv6 addresses will be removed from the interface if the undo ipv6 address command is executed without any parameter specified. Examples # Set the global IPv6 unicast address of VLAN-interface 100 to 2001::1 with prefix length 64. Method 1: system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 address 2001::1/64 Method 2: system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 address 2001::1 64 ipv6 address anycast Syntax ipv6 address ipv6-address/prefix-length anycast undo ipv6 address ipv6-address/prefix-length anycast 122