HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 107
command removes all the destination, servers on an interface.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Description Use udp-helper server to specify the destination server to which UDP packets are forwarded. Use undo udp-helper server to remove the destination server. No destination server is configured by default. You can configure up to 20 destination servers on an interface. Without the ip-address argument, the undo udp-helper server command removes all the destination servers on an interface. Related commands: display udp-helper server. Examples # Specify the IP address of the destination server in the public network as 192.1.1.2 on the VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] udp-helper server 192.1.1.2 100
100
Description
Use
udp-helper server
to specify the destination server to which UDP packets are forwarded.
Use
undo udp-helper server
to remove the destination server.
No destination server is configured by default.
You can configure up to 20 destination servers on an interface.
Without the
ip-address
argument, the
undo udp-helper server
command removes all the destination
servers on an interface.
Related commands:
display udp-helper server
.
Examples
# Specify the IP address of the destination server in the public network as 192.1.1.2 on the VLAN-interface
100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] udp-helper server 192.1.1.2