HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 135
ipv6 nd autoconfig other-flag
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
View Interface view Default level 2: System level Parameters None Description Use ipv6 nd autoconfig managed-address-flag to set the managed address configuration (M) flag to 1 so that the host can acquire an IPv6 address through stateful autoconfiguration (for example, from a DHCP server). Use undo ipv6 nd autoconfig managed-address-flag to restore the default. By default, the M flag is set to 0 so that the host can acquire an IPv6 address through stateless autoconfiguration. Examples # Configure the host to acquire an IPv6 address through stateful autoconfiguration. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 nd autoconfig managed-address-flag ipv6 nd autoconfig other-flag Syntax ipv6 nd autoconfig other-flag undo ipv6 nd autoconfig other-flag View Interface view Default level 2: System level Parameters None Description Use ipv6 nd autoconfig other-flag to set the other stateful configuration flag (O) to 1 so that the host can acquire information other than IPv6 address through stateful autoconfiguration (for example, from a DHCP server). Use undo ipv6 nd autoconfig other-flag to restore the default. By default, the O flag is set to 0 so that the host can acquire other information through stateless autoconfiguration. Examples # Configure the host to acquire information other than IPv6 address through stateless autoconfiguration. system-view [Sysname] interface vlan-interface 100 128