HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 130
ipv6 address auto
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
View Interface view Default level 2: System level Parameters ipv6-address/prefix-length: Specifies an IPv6 anycast address and its prefix length. The prefix length ranges 1 to 128. Description Use ipv6 address anycast to configure an IPv6 anycast address for an interface. Use undo ipv6 address anycast to remove the IPv6 anycast address from the interface. By default, no IPv6 anycast address is configured for an interface. Examples # Set the IPv6 anycast address of VLAN-interface 100 to 2001::1 with prefix length 64. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 address 2001::1/64 anycast ipv6 address auto Syntax ipv6 address auto View undo ipv6 address auto Interface view Default level 2: System level Parameters None Description Use ipv6 address auto to enable the stateless address autoconfiguration function on the interface. With this function enabled, the interface can automatically generate a global unicast address. Use undo ipv6 address auto to disable this function. The stateless address autoconfiguration function is disabled by default. After a global unicast address is generated through stateless autoconfiguration, a link-local address is generated automatically, which can be removed only by executing the undo ipv6 address auto command. Examples # Enable stateless address autoconfiguration on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 123