HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 43
display dhcp relay
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Default level 2: System level Parameters None Description Use dhcp select relay to enable the relay agent on the current interface. Upon receiving requests from an enabled interface, the relay agent will forward these requests to outside DHCP servers for IP address allocation. Use undo dhcp select relay to restore the default. By default, DHCP relay agent is disabled. Examples # Enable the DHCP relay agent on VLAN-interface 1. system-view [Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] dhcp select relay display dhcp relay Syntax View display dhcp relay { all | interface interface-type interface-number } [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters all: Displays information of DHCP server groups that all interfaces correspond to. interface interface-type interface-number: Displays information of the DHCP server group that a specified interface corresponds to. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display dhcp relay to display information about DHCP server groups correlated to an interface or all interfaces. Examples # Display information about DHCP server groups correlated to all interfaces. 36