HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 9
arp static, Examples, Syntax, Default level, Parameters, Description
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Use undo arp max-learning-num to restore the default. By default, a Layer 2 interface does not limit the number of dynamic ARP entries. The maximum number of dynamic ARP entries that a Layer 3 interface can learn is 4096. When the number argument is set to 0, the interface is disabled from learning dynamic ARP entries. Examples # Specify VLAN-interface 40 to learn up to 50 dynamic ARP entries. system-view [Sysname] interface vlan-interface 40 [Sysname-Vlan-interface40] arp max-learning-num 50 # Specify GigabitEthernet 1/0/1 to learn up to 100 dynamic ARP entries. system-view [Sysname] interface GigabitEthernet 1/0/1 [Sysname-GigabitEthernet1/0/1] arp max-learning-num 100 # Specify Layer 2 aggregate interface bridge-aggregation 1 to learn up to 100 dynamic ARP entries. system-view [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] arp max-learning-num 100 arp static Syntax arp static ip-address mac-address [ vlan-id interface-type interface-number ] [ vpn-instance vpn-instance-name ] View undo arp ip-address [ vpn-instance-name ] System view Default level 2: System level Parameters ip-address: Specifies the IP address in an ARP entry. mac-address: Specifies the MAC address in an ARP entry, in the format H-H-H. vlan-id: Specifies the ID of a VLAN to which a static ARP entry belongs, in the range of 1 to 4094. interface-type interface-number: Specifies the interface type and interface number. vpn-instance vpn-instance-name: Specifies the MPLS L3 VPN for a static ARP entry. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Without this option, the static ARP entry belongs to the public network. Description Use arp static to configure a static ARP entry in the ARP mapping table. Use undo arp to remove an ARP entry. 2