HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 20
local-proxy-arp enable, Default level, Parameters, Description, Examples, Syntax
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Default level 2: System level Parameters interface interface-type interface-number: Displays the proxy ARP status of the interface specified by the argument interface-type interface-number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see the Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display proxy-arp to display the proxy ARP status. If an interface is specified, the proxy ARP status of the specified interface is displayed; if no interface is specified, the proxy ARP status of all interfaces is displayed. Related commands: proxy-arp enable. Examples # Display the proxy ARP status on VLAN-interface 1. display proxy-arp interface Vlan-interface 1 Interface Vlan-interface 1 Proxy ARP status: disabled local-proxy-arp enable Syntax local-proxy-arp enable [ ip-range startIP to endIP ] View undo local-proxy-arp enable VLAN interface view Default level 2: System level Parameters ip-range startIP to endIP: Specifies the IP address range for which local proxy ARP is enabled. The start IP address must be lower than or equal to the end IP address. Description Use local-proxy-arp enable to enable local proxy ARP. Use undo local-proxy-arp enable to disable local proxy ARP. By default, local proxy ARP is disabled. Only one IP address range can be specified by using the ip-range keyword on an interface. 13