HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 24
IP addressing configuration commands, display ip interface
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
IP addressing configuration commands display ip interface Syntax View display ip interface [ interface-type interface-number ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters interface-type interface-number: Specifies an interface by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see the Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ip interface to display IP configuration information for a specified Layer 3 interface or all Layer 3 interfaces. Examples # Display IP configuration information for interface VLAN-interface 1. display ip interface vlan-interface 1 Vlan-interface1 current state :DOWN Line protocol current state :DOWN Internet Address is 1.1.1.1/8 Primary Broadcast address : 1.255.255.255 The Maximum Transmit Unit : 1500 bytes input packets : 0, bytes : 0, multicasts : 0 output packets : 0, bytes : 0, multicasts : 0 ARP packet input number: 0 Request packet: 0 Reply packet: 0 Unknown packet: 0 TTL invalid packet number: 0 ICMP packet input number: 0 Echo reply: 0 Unreachable: 0 17