HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 40
dhcp relay security tracker, dhcp relay server-detect
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Examples # Disable the DHCP relay agent from periodically refreshing dynamic client entries. system-view [Sysname] undo dhcp relay security refresh enable dhcp relay security tracker Syntax dhcp relay security tracker { interval | auto } View undo dhcp relay security tracker [ interval ] System view Default level 2: System level Parameters interval: Specifies the refreshing interval in seconds, in the range of 1 to 120. auto: Specifies the auto refreshing interval, which is the value of 60 seconds divided by the number of binding entries. The more entries there are, the shorter the interval. The shortest interval is no less than 500 ms. Description Use dhcp relay security tracker to set a refreshing interval at which the relay agent contacts the DHCP server for refreshing dynamic bindings. Use undo dhcp relay security tracker to restore the default interval. The default refreshing interval is auto, the value of 60 seconds divided by the number of binding entries. Related commands: display dhcp relay security tracker. Examples # Set the refreshing interval as 100 seconds. system-view [Sysname] dhcp relay security tracker 100 dhcp relay server-detect Syntax dhcp relay server-detect View undo dhcp relay server-detect System view Default level 2: System level 33