HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 115
display ipv6 neighbors
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
display ipv6 neighbors Syntax View display ipv6 neighbors { { ipv6-address | all | dynamic | static } [ slot slot-number ] | interface interface-type interface-number | vlan vlan-id } [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters ipv6-address: Specifies the IPv6 address whose neighbor information is to be displayed. all: Displays information of all neighbors, including neighbors acquired dynamically and configured statically on the public network and all private networks. dynamic: Displays information of all neighbors acquired dynamically. static: Displays information of all neighbors configured statically. slot slot-number: Displays the neighbor information on a specified IRF member switch. The slot-number argument specifies the ID of an IRF member switch. The value range for the argument depends on the number of member switches and their member IDs in the IRF fabric, which you can display with the display irf command. On a standalone device, the slot-number argument specifies the ID of the device. interface interface-type interface-number: Displays information of the neighbors of a specified interface. vlan vlan-id: Displays information of the neighbors of a specified VLAN whose ID ranges from 1 to 4094. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ipv6 neighbors to display neighbor information. You can use the reset ipv6 neighbors command to clear specific IPv6 neighbor information. Related commands: ipv6 neighbor, reset ipv6 neighbors. Examples # Display all neighbor information. display ipv6 neighbors all Type: S-Static D-Dynamic IPv6 Address Link-layer VID Interface FE80::200:5EFF:FE32:B800 0000-5e32-b800 N/A GE1/0/1 State REACH T Age S - 108