HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 133
ipv6 hoplimit-expires enable, ipv6 icmp-error, Reassembly Time Exceeded packets.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
generated link-local address will not take effect and the link-local address of an interface is still the manually assigned one. If you delete the manually assigned address, the automatically generated link-local address is validated. For automatic generation of an IPv6 link-local address, see the ipv6 address auto link-local command. Examples # Configure a link-local address for VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 address fe80::1 link-local ipv6 hoplimit-expires enable Syntax ipv6 hoplimit-expires enable View undo ipv6 hoplimit-expires System view Default level 2: System level Parameters None Description Use ipv6 hoplimit-expires enable to enable the sending of ICMPv6 Time Exceeded packets. Use undo ipv6 hoplimit-expires to disable the sending of ICMPv6 Time Exceeded packets. By default, the sending of ICMPv6 Time Exceeded packets is enabled. After you disable the sending of ICMPv6 Time Exceeded packets, the device will still send Fragment Reassembly Time Exceeded packets. Examples # Disable the sending of ICMPv6 Time Exceeded packets. system-view [Sysname] undo ipv6 hoplimit-expires ipv6 icmp-error Syntax ipv6 icmp-error { bucket bucket-size | ratelimit interval } * View undo ipv6 icmp-error System view Default level 2: System level 126