HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 30
DHCP relay agent configuration commands, dhcp dscp, dhcp enable
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DHCP relay agent configuration commands The DHCP relay agent configuration is supported only on VLAN interfaces. dhcp dscp Syntax dhcp dscp dscp-value View undo dhcp dscp System view Default level 2: System level Parameters dscp-value: Specifies the DSCP value in DHCP packets, in the range of 0 to 63. Description Use dhcp dscp to set the DSCP value for DHCP packets sent by the DHCP relay agent. Use undo dhcp dscp to restore the default. By default, the DSCP value in DHCP packets sent by the DHCP relay agent is 56. Examples # Set the DSCP value to 30 for DHCP packets. system-view [Sysname] dhcp dscp 30 dhcp enable Syntax dhcp enable View undo dhcp enable System view Default level 2: System level Parameters None Description Use dhcp enable to enable DHCP. 23