HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 41
dhcp relay server-group
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Parameters None Description Use dhcp relay server-detect to enable unauthorized DHCP server detection. Use undo dhcp relay server-detect to disable unauthorized DHCP server detection. By default, unauthorized DHCP server detection is disabled. With this function enabled, upon receiving a DHCP request, the DHCP relay agent will record from the request the IP addresses of all DHCP servers that ever offered IP addresses to the DHCP client and the receiving interface. Each server detected is recorded only once. The administrator can use this information from logs to check for unauthorized DHCP servers. After the information of recorded DHCP servers is cleared, the relay agent will re-record server information following this mechanism. Examples # Enable unauthorized DHCP server detection. system-view [Sysname] dhcp relay server-detect dhcp relay server-group Syntax dhcp relay server-group group-id ip ip-address View undo dhcp relay server-group group-id [ ip ip-address ] System view Default level 2: System level Parameters group-id: Specifies a DHCP server group by its number, in the range of 0 to 19. ip ip-address: Specifies a DHCP server IP address. Description Use dhcp relay server-group to specify a DHCP server for a DHCP server group. Use undo dhcp relay server-group to remove a DHCP server from a DHCP server group, if no ip ip-address is specified, all servers in the DHCP server group and the server group itself will be removed. By default, no DHCP server is specified for a DHCP server group. • The IP address of a DHCP server and the IP address of the DHCP relay agent's interface that connects the DHCP client cannot be in the same network segment. Otherwise, the client may fail to obtain an IP address. • If a server group has been correlated to multiple interfaces, you need to cancel these correlations before removing the server group. Related commands: display dhcp relay server-group. 34