HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Comm - Page 143
ipv6 neighbors max-learning-num, ipv6 pathmtu
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Examples # Set the age timer for ND entries in stale state to two hours. system-view [Sysname] ipv6 neighbor stale-aging 2 ipv6 neighbors max-learning-num Syntax ipv6 neighbors max-learning-num number View undo ipv6 neighbors max-learning-num Layer 2 Ethernet port view, VLAN interface view, Layer 2 aggregate interface view Default level 2: System level Parameters number: Maximum number of neighbors that can be dynamically learned by the interface, ranging from 1 to 2048. Description Use ipv6 neighbors max-learning-num to configure the maximum number of neighbors that can be dynamically learned on the interface. Use undo ipv6 neighbors max-learning-num to restore the default. By default, a Layer 2 interface does not limit the number of neighbors dynamically learned. A Layer 3 interface can learn up to 2048 neighbors dynamically. Examples # Set the maximum number of neighbors that can be dynamically learned on VLAN-interface 100 to 10. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 neighbors max-learning-num 10 ipv6 pathmtu Syntax ipv6 pathmtu ipv6-address [ value ] View undo ipv6 pathmtu ipv6-address System view Default level 2: System level Parameters ipv6-address: IPv6 address. value: Path MTU of a specified IPv6 address, ranging from 1280 to 10000 bytes. 136