HP LaserJet 4 Service Manual - Page 109
Removing the PC Tray 2 Pickup Roller
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Removing the PC (Tray 2) Pickup Roller The PC Pickup Roller is underneath the printer (see Figure 4-7). To remove the Pickup Roller: 1 Turn OFF and unplug the power cord from the rear of the printer. If your interface cable is long enough, it may stay attached, if not, remove it also. 2 Remove the Toner Cartridge and the PC tray (Tray 2). 3 Lay the printer on its left side. 4 Remove the PC (Tray 2) Pickup Roller by pinching the release clips and sliding the roller off the shaft. Figure 4-7 Removing the PC (Tray 2) Pickup Roller (printer is turned on its left side) Preventive Maintenance 4-13
Removing the PC (Tray 2) Pickup Roller
The PC Pickup Roller is underneath the printer (see Figure 4-7).
To remove the Pickup Roller:
1
Turn OFF and unplug the power cord from the rear of the
printer. If your interface cable is long enough, it may stay
attached, if not, remove it also.
2
Remove the Toner Cartridge and the PC tray (Tray 2).
3
Lay the printer on its left side.
4
Remove the PC (Tray 2) Pickup Roller by pinching the release
clips and sliding the roller off the shaft.
Figure 4-7
Removing the PC (Tray 2) Pickup Roller (printer
is turned on its left side)
Preventive Maintenance
4-13