HP LaserJet 4 Service Manual - Page 199
Lower Cassette Pickup Motor Removal
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Lower Cassette Pickup Motor Removal Figure 1-38 Lower Cassette Upper Front Cover 1 Open the sensor cover and disconnect the center and rear connectors (see Figure 6-37, callout 2). 2 Release the (2) tabs that hold the Upper Front Cover (access the tabs through the slots with a small screwdriver - see Figure 6-38 callout 1). Remove the cover by rotating it toward the front. 3 Remove the (2) screws from the front and rear left side (see Figure 6-38 callout 2). 4 Remove the cables from the race channel at the front of the Lower Cassette Base (see Figure 6-37). Note Note how the cables are routed in the the cable race. Be careful not to damage the cables during reassembly. (continued on next page) 6-45 Removal and Replacement
Lower Cassette Pickup Motor Removal
1
Open the sensor cover and disconnect the center and rear
connectors (see Figure 6-37, callout
2
).
2
Release the (2) tabs that hold the Upper Front Cover (access
the tabs through the slots with a small screwdriver - see
Figure 6-38 callout
1
).
Remove the cover by rotating it toward
the front.
3
Remove the (2) screws from the front and rear left side (see
Figure 6-38 callout
2
).
4
Remove the cables from the race channel at the front of the
Lower Cassette Base (see Figure 6-37).
Note
Note how the cables are routed in the the cable
race.
Be careful not to damage the cables during
reassembly.
(continued on next page)
Figure 1-38
Lower Cassette Upper Front Cover
6-45 Removal and Replacement