HP LaserJet 4 Service Manual - Page 206
LaserJet 4, LaserJet 4 Plus/5
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Figure 1-43 Left Side Fuser Cover 5 Remove the (1) Heat Lamp lead (thermoswitch screw)(see Figure 6-43 callout 1). 6 Press the thermoswitch tab towards the paper exit flag to release the tab (see Figure 6-43 callout 2). Slide the Thermoswitch off the fuser frame (see Figure 6-43, callout 3). 7 LaserJet 4: Remove the cable retainer from the fuser frame, and free the heat lamp lead from the cable retainer. Note the orientation of the cable retainer. LaserJet 4 Plus/5: Remove the (2) screws from the end cover (see Figure 6-43, callouts 4 and 5). Note the wavy washer on the (1) screw touching the copper contact (see Figure 6-43, callout 4). Remove the thermistor connector from the frame and pull apart (see Figure 6-43, callout 6). Note the position of the Fuser Shipping Lever and remove from assembly. (continued on next page) 6-52 Removal and Replacement