HP LaserJet 4 Service Manual - Page 64

Changing the Control Panel Display Language The default control panel display language is set for English. Supported languages are: English, French, German, Italian, Spanish, Finnish, Danish, Dutch, Swedish, Norwegian, and Portuguese. Follow these instructions to change the display language. 1 Switch OFF the printer. 2 Press and hold [Enter] (or Select on the LJ 5) while switching the printer ON until CONFIG LANGUAGE appears in the display. 3 After the power-on self test, LANGUAGE=ENGLISH appears. Press [+] until the desired language appears in the display. 4 Press [Enter] to save your choice. An asterisk (*)appears next to the language to indicate it is now the default. 5 Press [On Line]. The On Line indicator is lit, and display messages are now in the language you selected. Note If the display language is changed, replace or install the Control Panel Overlay to match the selected language. See the index to Chapter 6 for instructions on changing or installing the Control Panel Overlay. Note Failure to explicitly select a language after powering on the printer while holding down the ENTER or SELECT key will cause the printer to prompt for a specific language every time it is powered on. 3-28 Configuration