HP LaserJet 4 Service Manual - Page 383
Removing the Switchback Assembly
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 383 highlights
Removing the Switchback Assembly Figure A-23 Switchback Assembly Hinge Pins 1 Pull out the pin located on the Power PCA side (see Figure A-23, callout 1). 2 Release the (1) E-clip on the upper pin near the retaining arm (see Figure A-23, callout 2). 3 Pull the retaining arm off the pin. 4 Rotate the switchback assembly and remove. 5 Unplug the connectors. Duplexer A -27
Removing the Switchback Assembly
1
Pull out the pin located on the Power PCA side (see Figure
A-23, callout
1
).
2
Release the (1) E-clip on the upper pin near the retaining arm
(see Figure A-23, callout
2
).
3
Pull the retaining arm off the pin.
4
Rotate the switchback assembly and remove.
5
Unplug the connectors.
Figure A-23
Switchback Assembly Hinge Pins
Duplexer
A -27