HP LaserJet 4 Service Manual - Page 176
Fuser Assembly Removal
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Fuser Assembly Removal Figure 6-20 Caution Fuser Assembly Screws The Fuser Assembly may be hot. Allow plenty of time for the fuser to cool before beginning the fuser removal procedure. 1 Open the rear door. 2 Remove the (2) screws that hold the Fuser to the printer frame (see Figure 6-20, callout 1). 3 Slightly lift the Fuser by both the right and left sides to clear the locator points. 4 Pull the Fuser from the printer. Note The Fuser Assembly from the LaserJet 4 cannot be interchanged with the Fuser Assembly from the LaserJet 4 Plus or 5 printers. 6-22 Removal and Replacement
Fuser Assembly Removal
Caution
The Fuser Assembly may be hot
. Allow plenty of
time for the fuser to cool before beginning the
fuser removal procedure.
1
Open the rear door.
2
Remove the (2) screws that hold the Fuser to the printer
frame
(see Figure 6-20, callout
1
).
3
Slightly lift the Fuser by both the right and left sides to clear
the locator points.
4
Pull the Fuser from the printer.
Note
The Fuser Assembly from the LaserJet 4 cannot
be interchanged with the Fuser Assembly from
the LaserJet 4 Plus or 5 printers.
Figure 6-20
Fuser Assembly Screws
6-22 Removal and Replacement