HP LaserJet 4 Service Manual - Page 195
Output Assembly Removal
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Output Assembly Removal Figure 1-34 Output Assembly Removal 1 Remove the Right Side Cover, the Top Cover, and the Left Side Cover. 2 Release the grounding strap from the left side of the frame. 3 Rotate the top of the Output Assembly toward the front of the printer while releasing the two retaining latches (see Figure 6-34, callout 1) until the locating tabs are free. Slide the assembly to the rear and lift it out of the printer. 6-41 Removal and Replacement
Output Assembly Removal
1
Remove the Right Side Cover, the Top Cover, and the Left
Side Cover.
2
Release the grounding strap from the left side of the frame.
3
Rotate the top of the Output Assembly toward the front of the
printer while releasing the two retaining latches (see Figure
6-34, callout 1) until the locating tabs are free.
Slide the
assembly to the rear and lift it out of the printer.
Figure 1-34
Output Assembly Removal
6-41 Removal and Replacement