HP LaserJet 4 Service Manual - Page 94
Personality SIMM, PostScript
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Personality SIMM (PostScript) A personality (printer language) SIMM installation can be verified as outlined below (a PostScript SIMM is used in this example). Note For the LaserJet 5/5M/5N, the On Line key has been replaced by the Go key. The Enter key has been replaced by the Select key. 1 Plug in the power cord and turn ON the printer. 2 After a few seconds, the on line indicator should light and 00 READY should appear in the control panel display. If an error message appears, refer to "Troubleshooting a SIMM Board" following. 3 Press [On Line to take the printer off line. 4 Press [Menu] until JOB MENU appears in the control panel display. 5 Press [Item] until PERSONALITY=AUTO*, the default, appears in the control panel display. 6 Press [+] until PERSONALITY=PS appears in the display. This indicates that your printer recognizes that PostScript is installed. If PERSONALITY=PS does not appear, check the SIMM installation. 7 Press [On Line] to return the printer on line. 3-58 Configuration