HP LaserJet 4 Service Manual - Page 382
Removing the Holding Tray Paper Sensor
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 382 highlights
Removing the Holding Tray Paper Sensor Figure A-22 Holding Tray Paper Sensor 1 Release the output holding tray. 2 Remove the (2) screws from the stepper motor mount and remove mount. (This provides access to the paper sensor latches.) 3 Squeeze the (2) latch points of the paper sensor to release (see Figure A-22). 4 Disconnect the connector and remove the paper sensor. A -26 Duplexer
Removing the Holding Tray Paper Sensor
1
Release the output holding tray.
2
Remove the (2) screws from the stepper motor mount and
remove mount.
(This provides access to the paper sensor
latches.)
3
Squeeze the (2) latch points of the paper sensor to release (see
Figure A-22).
4
Disconnect the connector and remove the paper sensor.
Figure A-22
Holding Tray Paper Sensor
A -26 Duplexer