HP LaserJet 4 Service Manual - Page 194
Laser Jet 4, Laser Jet 4 Plus/5
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Figure 1-33 Exhaust Fan Removal (Laser Jet 4 shown) 3 Remove the RFI shield (LJ 4 only) by releasing the retaining tab and sliding the shield up (see Figure 6-33, callout 1). 4 Laser Jet 4: Release the (4) clips from the fan ducting to provide clearance and remove the fan from the top of the printer (see Figure 6-33, callout 2). Laser Jet 4 Plus/5: Remove (1) screw on the right-rear and release the tabs on the lower left adjacent to the Output Paper Assembly 5 Remove the fan. Note When reinstalling the fan, verify that the air is blowing upward. 6-40 Removal and Replacement
3
Remove the RFI shield (LJ 4 only) by releasing the retaining
tab and sliding the shield up (see Figure 6-33, callout 1)
.
4
Laser Jet 4:
Release the (4) clips from the fan ducting to
provide clearance and remove the fan from the top of the
printer (see Figure 6-33, callout
2
).
Laser Jet 4 Plus/5:
Remove (1) screw on the right-rear and
release the tabs on the lower left adjacent to the Output Paper
Assembly
5
Remove the fan.
Note
When reinstalling the fan, verify that the air is
blowing upward.
Figure 1-33
Exhaust Fan Removal (Laser Jet 4 shown)
6-40 Removal and Replacement