HP LaserJet 4 Service Manual - Page 162
Rear Door Removal
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Rear Door Removal Figure 6-6 Releasing the Door Support 1 Remove the PC tray (Tray 2). 2 Open the Rear Door. Support the door with one hand. 3 Release the door support from the rear of the printer frame as follows: (see Figure 6-6) a Using needle-nose pliers, squeeze the tabs on the end of the retaining strap. Slide the strap up and out of the printer frame. b Release the retaining strap tab from the slot in the printer frame. c Lift the tab to free it from the slot. (continued on next page) 6-8 Removal and Replacement
Rear Door Removal
1
Remove the PC tray (Tray 2).
2
Open the Rear Door. Support the door with one hand.
3
Release the door support from the rear of the printer frame as
follows: (see Figure 6-6)
a
Using needle-nose pliers, squeeze the tabs on the end of the
retaining strap. Slide the strap up and out of the printer
frame.
b
Release the retaining strap tab from the slot in the printer
frame.
c
Lift the tab to free it from the slot.
(continued on next page)
Figure 6-6
Releasing the Door Support
6-8 Removal and Replacement