HP LaserJet 4 Service Manual - Page 433
Put the HP LaserJet 5 in Ready Mode.
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 433 highlights
If all these elements are properly installed and configured, use the IR test tool to test the IrDA protocol transmission and device operation. This tool for troubleshooting IR communication problems, shown in Figure 10, has been developed by Genoa Technology, Inc., in cooperation with Hewlett-Packard. The part number is 5062-4661 and can be ordered through HP Parts Direct Ordering. The IR test tool can be used with any IrDA-compliant primary or secondary device, regardless of manufacturer. IR Diodes Test Connect Pass LB Peripheral Computer Test Test Test Modes PCL Printer PostScript Printer Energy Detect Test Frame switches Figure B-8 Infrared Test Tool To test the peripheral device: 1 Put the HP LaserJet 5 in Ready Mode. 2 Press the "Peripheral Test" button on the test tool. The LEDs on the test tool will sequence. If the "PASS" LED lights, the test was successful, indicating that communication with the printer's IR port is functioning normally. LaserJet 5/5M/5N Printer B-39