HP LaserJet 4 Service Manual - Page 369
Removing the Back Cover, Removing the Front Cover
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 369 highlights
Removing the Back Cover Figure A-9 Back Cover 1 Place the duplexer on a table or bench so that the back overhangs the edge by a few inches. 2 Release the (2) locating pins as shown in Figure A-9. 3 Rotate the cover downward until it is free. Removing the Front Cover With the side covers removed, the front cover is only attached by the holding tray arm. 1 With both side covers removed, open the holding tray. 2 Rotate the front cover 90 degrees to release the holding tray arm. Duplexer A -13
Removing the Back Cover
1
Place the duplexer on a table or bench so that the back
overhangs the edge by a few inches.
2
Release the (2) locating pins as shown in Figure A-9.
3
Rotate the cover downward until it is free.
Removing the Front Cover
With the side covers removed, the front cover is only attached by
the holding tray arm.
1
With both side covers removed, open the holding tray.
2
Rotate the front cover 90 degrees to release the holding tray
arm.
Figure A-9
Back Cover
Duplexer
A -13