HP LaserJet 4 Service Manual - Page 436
Situation, Solution
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 436 highlights
Situation Solution The printer prints only part of a page or document. The connection has been broken during transmission. If you move the portable device during transmission, the connection can be broken. IrDA-compliant devices are designed to recover from temporary connection interruptions. Re-establish the connection (depending on the device you are using, you can have anywhere from 3 to 20 seconds to re-establish the connection) The print job has been properly If the connection is broken sent to the printer, but the printer before the entire print job has will not print. been transmitted to the printer (printing has not yet started), the printer may not print any of the job. If the Data light is on, press the Job Cancel button to clear the printer's memory. Then, position the device within the range of operation, and print the job again. The IR status light turns off during transmission. The connection may have been broken If the Data light is on, press the Job Canel button to clear the printer's memory. Then, position the device within the range of operation, and print the job again. B-42 LaserJet 5/5M/5N Printer