HP LaserJet 4 Service Manual - Page 208
Fuser Gear Cap Removal
View all HP LaserJet 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Figure 1-45 Note Fuser Gear Cap Removal Before removing the gear cover, note the routing of the wires in the gear cover slots. 9 Remove the (2) screws from the right side gear cover (see Figure 6-45, callouts 1 and 2). Note the wavy washer on the (1) screw (callout 1) touching the copper contact. Remove the cover. 10 Remove the Heat Lamp (see Figure 6-45, callout 3), from the roller. Pull the lamp out the side of the assembly. 6-54 Removal and Replacement
Note
Before removing the gear cover, note the routing
of the wires in the gear cover slots.
9
Remove the (2) screws from the right side gear cover (see
Figure 6-45, callouts
1 and 2
). Note the wavy washer on the
(1) screw (callout
1
) touching the copper contact. Remove the
cover.
10
Remove the Heat Lamp (see Figure 6-45, callout
3
), from the
roller. Pull the lamp out the side of the assembly.
Figure 1-45
Fuser Gear Cap Removal
6-54 Removal and Replacement