HP LaserJet 4250 Service Manual - Page 366
jam in output device, For help press, message as 13.12.0A.
View all HP LaserJet 4250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
Table 7-7 Numerical printer messages (continued) Control panel message Description Recommended action 3 Remove all of the pages from the output bin. 4 Open the jam-access door and remove all of the pages. Close the access door. 5 If this error message persists, replace the stapler/stacker. 13.12.09 jam in output device For help press NOTE: The stacker or stapler/stacker LED blinks in amber. The stacker or stapler/stacker paper-inlet sensor has been active for longer than a specified time. 1 Press ( HELP button) for detailed information. 2 Press ( UP ARROW button) and (DOWN ARROW button) to step through the instructions. 3 Open the jam-access door and remove all of the pages. Close the access door. 4 If this error message persists, replace the stacker or stapler/stacker. 13.12.10 jam in output device For help press NOTE: The event log records this error message as 13.12.0A. NOTE: The stacker or stapler/stacker LED blinks in amber. A page did not arrive at the stacker or stapler/stacker paper-inlet sensor in the specified time. 1 Press ( HELP button) for detailed information. 2 Press ( UP ARROW button) and (DOWN ARROW button) to step through the instructions. 3 Open the jam-access door and remove all of the pages. Close the access door. 4 Verify that the output bin deflector (in the printer) is operating correctly. 5 If this error message persists, replace the stacker or stapler/stacker. 13.12.11 jam in output device A jam was detected when the stacker or stapler/stacker power was turned on. For help press NOTE: The event log records this error message as 13.12.0B. NOTE: The stacker or stapler/stacker LED blinks in amber. 1 Press ( HELP button) for detailed information. 2 Press ( UP ARROW button) and (DOWN ARROW button) to step through the instructions. 3 Remove all of the pages from the output bin. 4 Open the jam-access door and remove all of the pages. Close the access door. 5 If this error persists, replace the stacker or the stapler/stacker. 352 7 Troubleshooting