HP Photosmart C5300 User Guide - Page 278
Sensor failure, Solution 3: Contact HP support
View all HP Photosmart C5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
8. Reinstall the ink cartridge. 9. Close the ink cartridge door, and check if the error message has gone away. 10. If you still receive the error message, turn the product off, and then on again. Check to see if your ink cartridge is still under warranty and the end of warranty date has not been reached. • If the end of warranty date has been reached, purchase a new ink cartridge. • If the end of warranty date has not been reached, contact HP support for service or replacement. Go to: www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. For more information, see: • "Ink cartridge warranty information" on page 281 • "Replace the ink cartridges" on page 101 • "Clean the printhead" on page 105 Cause: The indicated ink cartridge contacts were defective. If this did not solve the issue, try the next solution. Solution 4: Contact HP support Solution: Contact HP support for service. Go to: www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Cause: The ink cartridges were not intended for use in this product. Sensor failure Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. • Solution 1: Clean the sensor • Solution 2: Clean the sensor windows on the ink cartridges • Solution 3: Contact HP support Errors 275 Troubleshooting