HP ProLiant 4500 Compaq ProLiant Cluster HA/F100 and HA/F200 Administrator Gui - Page 117
Other Functions, Refresh, Rescan
View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
5-14 Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Shortcut method Following is a shortcut method to change a path from Active to Standby: 1. Highlight the Active path you want to change. 2. Click the right mouse button to display a pop-up menu. 3. Select Set As Standby from the menu. The selected Active path will change to Standby when you select Apply Changes or close Redundancy Manager. Other Functions Two helpful functions for using the Redundancy Manager graphical user interface (GUI) are Refresh and Rescan. Refresh Refresh (F5) updates information on the GUI screen, checks for path failures and path changes, and displays the current configuration. The GUI will not update automatically. The changes that you have made will not be saved. Use refresh to update the main screen to see the current configuration or to see if a failure has happened in the system. Refresh does not affect any processing or interrupt any of the system's functions. Rescan Rescan is used to check for new host bus adapters and array controllers and after adding and removing physical drives. Use rescan after a hot-swap of host bus adapters or array controllers and after adding or removing physical drives. NOTE: For every hot replace, a rescan should be run on each machine in a cluster. NOTE: Reboot each server to clear the SCSI port after seven hot replaces. 1. Select Features from the Main screen. 2. Select Rescan from the Features menu.