HP ProLiant DL288 HP ProLiant DL288 G6 Server Maintenance and Service Guide - Page 103
To install the Optical Disc Drive PCI cage, remove the screw on the rear panel of the chassis.
View all HP ProLiant DL288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
8. Push the hard dive assembly into the drive bay until it stops. 9. Press the HDD carrier latch inward until it clicks. Figure 76 Installing the Rear Hard Drive To install the Optical Disc Drive PCI cage: 1. Loosen the thumbscrews that secure the optical disc drive PCI cage to the system board and remove the screw on the rear panel of the chassis. 2. Lift the optical disc drive PCI cage away from the system board. Figure 77 Removing the optical disc drive PCI Cage Removal and replacement procedures 99
Removal and replacement procedures
99
8.
Push the hard dive assembly into the drive bay until it stops.
9.
Press the HDD carrier latch inward until it clicks.
Figure 76
Installing the Rear Hard Drive
To install the Optical Disc Drive PCI cage:
1.
Loosen the thumbscrews that secure the optical disc drive PCI cage to the system board and
remove the screw on the rear panel of the chassis.
2.
Lift the optical disc drive PCI cage away from the system board.
Figure 77
Removing the optical disc drive PCI Cage