HP ProLiant DL288 HP ProLiant DL288 G6 Server Maintenance and Service Guide - Page 83

Memory, Supported DIMM capacity: 2 GB, 4 GB, 8 GB and 16 GB

Get HP ProLiant DL288 PDF manuals and user guides View all HP ProLiant DL288 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

To install the air baffle: 1. Connect all necessary cables. 2. Gently place the air baffle on the system board. Figure 47 Installing the Air Baffle Memory The system board has twelve DIMM slots that support up to 192 GB maximum system memory (Two 16 GB Quad-rank or Dual-rank DIMMs in each of the four channels). You must adhere to the following guidelines when adding or replacing memory modules: • For 2P system, both physical processors must be of the same type and speed. • Use 800/1066/1333 MHz DDR3 RDIMM/UDIMM. • Supported DIMM capacity: 2 GB, 4 GB, 8 GB and 16 GB • Installation guide for 1P configuration: ○ Follow the sequence of 2A, 4B, 6C, 1D, 3E, and 5F for the corresponding processor when installing the memory. • Installation guide for 2P configuration: ○ Follow the sequence of 2A, 4B, 6C, 1D, 3E, and 5F for the corresponding processor when installing the memory. ○ Install at least one memory DIMM for each processor. ○ The memory quantity installed for each processor can be different. Removal and replacement procedures 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
Removal and replacement procedures
79
To install the air baffle:
1.
Connect all necessary cables.
2.
Gently place the air baffle on the system board.
Figure 47
Installing the Air Baffle
Memory
The system board has twelve DIMM slots that support up to 192 GB maximum system memory (Two
16 GB Quad-rank or Dual-rank DIMMs in each of the four channels).
You must adhere to the following guidelines when adding or replacing memory modules:
•
For 2P system, both physical processors must be of the same type and speed.
•
Use 800/1066/1333 MHz DDR3 RDIMM/UDIMM.
•
Supported DIMM capacity: 2 GB, 4 GB, 8 GB and 16 GB
•
Installation guide for 1P configuration:
○
Follow the sequence of 2A, 4B, 6C, 1D, 3E, and 5F for the corresponding processor when
installing the memory.
•
Installation guide for 2P configuration:
○
Follow the sequence of 2A, 4B, 6C, 1D, 3E, and 5F for the corresponding processor when
installing the memory.
○
Install at least one memory DIMM for each processor.
○
The memory quantity installed for each processor can be different.