HP ProLiant DL288 HP ProLiant DL288 G6 Server Maintenance and Service Guide - Page 118
Power supply unit (PSU
View all HP ProLiant DL288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Power supply unit (PSU) Located on the rear panel of the server power supply is designed with three types of power supply units. They are 460 W and 750 W PSU with power factor correction (PFC) function. Table 20 lists how to configure the power supply with the different system models. Table 20 Power Supply Unit Configurations System model Power supply unit 4 3.5" HDD model One or two 460 W power supply unit 8 3.5" HDD model One or two 460 W power supply unit 8 2.5" HDD model One or two 460 W power supply unit 12 3.5" HDD model One or two 750 W power supply unit 25 2.5" HDD model One or two 750 W power supply unit Figure 99 Power Supply Unit WARNING: Take note of the following reminders to reduce the risk of personal injury from electric shock hazards and/or damage to the equipment. • Installation of power supply units should be referred to individuals who are qualified to service server systems and are trained to deal with equipment capability of generating hazardous energy levels. • DO not open the power supply unit. There are no serviceable parts inside it. To remove the power supply: 1. Press the port wine colored tab. 2. Slide the hot-plug power supply out of the power supply bay. Removal and replacement procedures 114