HP ProLiant DL288 HP ProLiant DL288 G6 Server Maintenance and Service Guide - Page 74
System board configuration, Processor
View all HP ProLiant DL288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
System board configuration Processor HP ProLiant DL288 G6 Server supports Intel Xeon 5500 and 5600 Series processors. If a single processor is installed, then use socket 1. When two processors are used, the server supports boot functions through the processor installed in socket 1. However, if processor 1 fails, the system cannot boot up, and if processor 2 fails, the system will be automatically booted from processor 1 and provide a processor failure message. The processor socket supports 2P Intel Xeon processor with integrated memory controller. CAUTION: It is recommended to use processors of the same speeds or cache sizes to prevent possible server malfunction. Figure 33 Processor Locations Item Description 1 Processor 1 2 Processor 2 WARNING: To reduce the risk of personal injury from hot surfaces, allow the heat sink and the processor to cool before touching them. NOTE: Before installing the processor, remove the air baffle. Removal and replacement procedures 70